Brick

Panel Industrial Loft

Decorative brick panel from the Brick collection, with the realism of old brick and the light weight of engineered materials.

Decorative brick panel Industrial Loft from the Brick collection
Dimensions in cm. Tap the image to enlarge it.
  • Format1.01 m² per panel · 128 × 84 cm · corner pieces
  • MaterialPR · 6–7 kg/m² (interior)
  • FinishLoft-style industrial brick · 9 colour finishes
  • ApplicationWall · Interior
EnvejecidoRef. 530
BlancoRef. 531
Blanco AntiguoRef. 532
MarrónRef. 533
Marrón TierraRef. 534
NaturalRef. 535
IndustrialRef. 536
Gris CarbónRef. 537
Gris CombinadoRef. 538

9 colour finishes (Envejecido, Blanco, Blanco Antiguo, Marrón, Marrón Tierra, Natural, Industrial, Gris Carbón and Gris Combinado) · PR quality for interiors.

Interior Fire-resistant Thermal insulation Lightweight Bespoke
Interior
Panel cross-section PR

Twin-layer panel: a stone sheet of roughly 4 mm over a high-density polyurethane core that provides thermal and acoustic insulation and acts as a damp barrier. It is the lightest and 'warmest' material in the range, designed for interiors where acoustic and thermal comfort matter.

6–7 kg/m² Weight
B-s1,d0 cert. ENAC Reaction to fire
Thermal + acoustic Insulation
Interior Application

Brick panels are jigsaw-style tongue-and-groove and weigh very little, so they are installed over the existing surface with no building work: prepare the wall, apply adhesive to the back of the panel, slot it into the previous one and finish the joints with the jointing compound and the paint for the chosen colour. For corners, use the angle pieces. Optional bonding accessory: MSA-3 adhesive compound.

1
Gather your materials
Drill, adhesive, spirit level, rule, plugs and screws.
2
Measure and level
A clean, dry and level wall.
3
Cut to size
With a saw or an angle grinder with a fine disc.
4
Apply adhesive
Beads of adhesive from top to bottom on the back of the panel.
5
Position the panel
Press the panel against the wall.
6
Fit the panels together
Join panel to panel, with no gaps.
7
Reinforce with screws
With the panels properly fitted, reinforce with 4-8 screws per panel.
8
Finish and fill
Fit the trim profiles, then fill and paint the joints.
Download technical data

Includes the model's data sheet.

Request information or samples
Tell us
your project