Arquitek

Panel Loun

Decorative slatted panel from the Arquitek collection, made with high-quality materials.

Arquitek decorative panel Loun
Dimensions in cm. Tap the image to enlarge it.
  • Format3 sizes that combine (LOUN-1 · LOUN-2 · LOUN-3)
  • MaterialPR and EcoLuxer® (cement effect)
  • FinishCement effect (3D relief)
  • ApplicationWall · Interior and exterior
Cement effectSingle finish

This model comes only in cement effect: PR finish (interior) and EcoLuxer® (interior and exterior). It has no colour range.

Interior Exterior Fire-resistant Thermal insulation Lightweight Bespoke
Interior and exterior
Panel cross-section EcoLuxer®

Lightweight marble-dust panel made with more than 16 mineral and chemical fillers. Highly resistant outdoors, to fire and to the weather, with excellent resistance to abrasion and chemicals. Its low weight and large format make installation quick and straightforward. Suitable for interiors and exteriors.

15–20 kg/m² Weight
B-s2,d0 Euroclase Reaction to fire
75% de cantera Recyclable material
Interior and exterior Application
Interior
Panel cross-section PR

Twin-layer panel: a stone sheet of roughly 4 mm over a high-density polyurethane core that provides thermal and acoustic insulation and acts as a damp barrier. It is the lightest and 'warmest' material in the range, designed for interiors where acoustic and thermal comfort matter.

6–7 kg/m² Weight
B-s1,d0 cert. ENAC Reaction to fire
Thermal + acoustic Insulation
Interior Application

Fitting the Loun panel is quick and straightforward: bond it directly to the wall with PanelPiedra® special adhesives or fix it with screws. Combine it with the decorative profiles to create dividers or architectural shapes.

1
Gather your materials
Drill, adhesive, spirit level, rule, plugs and screws.
2
Measure and level
A clean, dry and level wall.
3
Cut to size
With a saw or an angle grinder with a fine disc.
4
Apply adhesive
Beads of adhesive from top to bottom on the back of the panel.
5
Position the panel
Press the panel against the wall.
6
Fit the panels together
Join panel to panel, with no gaps.
7
Reinforce with screws
With the panels properly fitted, reinforce with 4-8 screws per panel.
8
Finish and fill
Fit the trim profiles, then fill and paint the joints.
Download technical data and 3D files

Includes the model's data sheet and its 3D files.

Request information or samples
3D view

Explore the panel in 3D

Rotate, zoom in and examine the panel at every size Loun.

LOUN-1
LOUN-2
LOUN-3
Tell us
your project