Cement

Panel Cemento

Cement effect decorative panel from the Cement collection, with an industrial finish and the light weight of engineered materials.

Cement effect decorative panel Cemento
Dimensions in cm. Tap the image to enlarge it.
  • Format0.82 m² (PR · 127 × 63) and 1.05 m² (HD · 140 × 75) per panel
  • MaterialPR 5–6 kg / HD 15–20 kg per panel
  • FinishSmooth cement effect · Gris, Óxido or Antracita (Ref. 320/321/322)
  • ApplicationWall · Interior (PR) and exterior (HD)
GrisRef. 320
ÓxidoRef. 321
AntracitaRef. 322

Available in Gris, Óxido and Antracita · PR (interior) and HD (interior and exterior).

Interior Exterior Fire-resistant Thermal insulation Lightweight Bespoke
Interior
Panel cross-section PR

Twin-layer panel: a stone sheet of roughly 4 mm over a high-density polyurethane core that provides thermal and acoustic insulation and acts as a damp barrier. It is the lightest and 'warmest' material in the range, designed for interiors where acoustic and thermal comfort matter.

6–7 kg/m² Weight
B-s1,d0 cert. ENAC Reaction to fire
Thermal + acoustic Insulation
Interior Application
Interior and exterior
Panel cross-section HD

Single-layer marble-dust (stone) panel: a stone-based polymer concrete of aggregates (calcium carbonates, dolomites, silicates, aluminas and melamines) with resins and fire-retardant additives. Its jigsaw-style tongue-and-groove system clads walls indoors and out, with water absorption of 0.3%, high mechanical strength and complete stability against the weather, thermal shock and chemicals. Made up of 75% surplus aggregate from quarries.

15–20 kg/m² Weight
B-s1,d0 Euroclase Reaction to fire
0,3 % de agua Absorption
Interior and exterior Application

Fitting is straightforward: prepare the surface (a clean, dry, levelled wall), plan the layout, apply the specific adhesive to the back, press each panel into place lining it up, and finish the joints with the jointing compound and cement paint for the colour chosen. Optional bonding accessory: MSA-3 adhesive compound.

1
Gather your materials
Drill, adhesive, spirit level, rule, plugs and screws.
2
Measure and level
A clean, dry and level wall.
3
Cut to size
With a saw or an angle grinder with a fine disc.
4
Apply adhesive
Beads of adhesive from top to bottom on the back of the panel.
5
Position the panel
Press the panel against the wall.
6
Fit the panels together
Join panel to panel, with no gaps.
7
Reinforce with screws
With the panels properly fitted, reinforce with 4-8 screws per panel.
8
Finish and fill
Fit the trim profiles, then fill and paint the joints.
Download technical data

Includes the model's data sheet.

Request information or samples
Tell us
your project