Remember

Panel Tresor

Retro decorative panel from the Remember collection, in old and charred timber, with the realism and the light weight of engineered materials.

Retro decorative panel Tresor from the Remember collection
Dimensions in cm. Tap the image to enlarge it.
  • Format1.64 m² per panel · 137 × 120 cm · 6 versions that combine
  • MaterialPR · 8–10.5 kg per panel (stone sheet + polyurethane core)
  • FinishComposition of retro trunks and cases · 3 finishes (PR-890 / PR-891 / PR-893)
  • ApplicationWall · Interior
Craquelado BlancoRef. PR-890
Craquelado ÓxidoRef. PR-891
Blanco ItaliaRef. PR-893

Three finishes —Craquelado Blanco, Craquelado Óxido and Blanco Italia— and six panel versions (Tresor 1 to 6) that combine so the wall never repeats the same pattern · PR finish for interiors.

Interior Fire-resistant Thermal insulation Lightweight Bespoke
Interior
Panel cross-section PR

Twin-layer panel: a stone sheet of roughly 4 mm over a high-density polyurethane core that provides thermal and acoustic insulation and acts as a damp barrier. It is the lightest and 'warmest' material in the range, designed for interiors where acoustic and thermal comfort matter.

6–7 kg/m² Weight
B-s1,d0 cert. ENAC Reaction to fire
Thermal + acoustic Insulation
Interior Application

Remember panels are jigsaw-style tongue-and-groove and weigh very little, so they are fitted straight onto the existing surface, with no building work and without needing a professional: prepare the wall (clean, dry and levelled), apply the specific adhesive to the back of the panel, slot it into the previous one and finish and fill the joints with the jointing compound and the paint for the finish chosen. Optional bonding accessory: MSA-3 adhesive compound.

1
Gather your materials
Drill, adhesive, spirit level, rule, plugs and screws.
2
Measure and level
A clean, dry and level wall.
3
Cut to size
With a saw or an angle grinder with a fine disc.
4
Apply adhesive
Beads of adhesive from top to bottom on the back of the panel.
5
Position the panel
Press the panel against the wall.
6
Fit the panels together
Join panel to panel, with no gaps.
7
Reinforce with screws
With the panels properly fitted, reinforce with 4-8 screws per panel.
8
Finish and fill
Fit the trim profiles, then fill and paint the joints.
Download technical data

Includes the model's data sheet.

Request information or samples
Tell us
your project